Keeping your Dyson vacuum’s filters clean is very important for maintaining its performance and suction power. Dirty filters can restrict airflow, reduce suction power and potential motor damage. So, let’s learn how to clean dyson filter! In this step-by-step guide, we’ll walk you through the process of cleaning 2 types of Dyson filters: the “Pre-filter” and the “Post-filter” for different Dyson models.

Dyson Pre-Filter Cleaning Steps

Different Dyson models have different types of filters like some models have pre-filters, some have post-filters and some have other types of filters. Here we are discussing the pre-filter cleaning steps. If your Dyson vacuum has the pre-filter then you must follow these steps of cleaning your Dyson vacuum filter.

Step 1: Remove the Pre-Filter

By lifting the pre-filter out of the cyclone assembly.

Note: Don’t use power on lifting the pre-filter.

Step 2: Wash Pre-Filter with Water

Now follow the steps of washing your pre-filter with water.

• Turn your pre filter upside-down and tap to remove excess debris.
• Run water over both sides (inside & outside), tapping and shaking to expel debris.
• Repeat until the water runs clear.
• Squeeze and twist to remove excess water.

Step 3: Squeeze and Twist your Pre-Filter

Squeeze and twist your pre-filter with both hands to ensure excess water is removed.

Step 4: Pre-Filter Drying Process

Now leave your filter in a warm place for “24 hours” for drying water from it. Ensure that the filter is dry before assembly.

Step 5: Refit the Pre-Filter in Your Dyson:

Once your pre-filter will dry then reassemble it in your dyson vacuum cyclone.

Dyson V6, Dyson V8, and Dyson V7 vacuum models have the pre-filters. So, if you have any of these Dyson vacuums then you need to apply this “Pre-filter” Dyson filter cleaning method on your vacuum filter.

If your vacuum filter needs to be replaced, then buy.

• Dyson V6 filter
• Dyson V8 filter
• Dyson V7 filter

Dyson Post-Filter Cleaning Steps

As some of the Dyson models have the pre-filters, on the other side some of the Dyson vacuum have the post-filters. Above we share the pre-filters cleaning steps now we’ll share the Dyson post-filter cleaning steps. If your Dyson vacuum has the post-filter then you must follow these steps of cleaning your Dyson vacuum filter.

Step 1: Remove the Post-Filter

Rotate your vacuum post-filter anti-clockwise until the 2 solid black dots align, then pull it off the back of the vacuum.

Step 2: Wash Post-Filter with Water

Run water into the open side, tapping and shaking to expel debris. Repeat until the water runs clear.

Step 3: Squeeze and Twist your Post-Filter

Squeeze and twist your post-filter with your hands to ensure that the excess water is removed.

Step 4: Post-Filter Drying Process

Now leave your post filter in a warm place for “24 hours” for drying water from it, same as pre-filter. Ensure that the filter is dry before assembly.

Step 5: Refit the Post-Filter in Your Dyson

For refitting the post-filter, align the “2 solid black dots” and rotate clockwise until the solid black dot lines up with the empty circle.

Dyson V10, Dyson V11, and Dyson V15 vacuum models have the post-filters. So, if you have any of these Dyson vacuums then you need to apply this “Post-filter” Dyson filter cleaning method on your vacuum filter.

If your vacuum filter needs to be replaced, then buy.

• Dyson V10 filter
• Dyson V11 filter
• Dyson V15 filter

Dyson Vacuum Filter Maintenance Tips

For increasing the suction power or lifetime of the vacuum you need to keep your vacuum filter clean. With a clean filter you can get the best performance from your vacuum. By following these simple maintenance tips, you can keep your Dyson vacuum working its best and enjoy powerful suction for longer.

• Clean monthly (once in a month)
• Only use Cold water (Avoid detergents)
• Handle with care (don’t use hard thing like knife etc)
• Tap and shake
• Wash filter from both side (inside and out)
• Squeeze and twist the filter after wash
• Must dry filter for hours 
• Follow specific model instructions (different models have different safety instructions)

Conclusion

Keeping your Dyson filters clean is super important! Just follow the steps we talked about, and you’ll make sure both the pre-filter and post-filter are clean. This helps your Dyson vacuum work its best, and it keeps your home free from dust and allergens. Plus, a clean filter protects the motor from damage. So, spend a bit of time taking care of your Dyson filters, and your vacuum will keep doing a great job for a long time.